Penis Enlargement Products and Forum

[mbobb2012]

I keep reading on how to adjust the tension to 600grams and i have read it in the forum and the manual but i still have no clue what anyone is talking about... Help please

[pfm]

Hi mbobb2012,
When you have the extender on and you are strapped in, there are a pair of knurled knobs between the base and the tension rods. To increase tension turn the adjustment knobs to the left; this makes the length of the extender longer. If you have more than a half inch of the thin threaded shaft exposed, stop! Screw the knob to the right till its near stop point and pull the support piece firmly and evenly off the rods and add an extension to both ends on the tension rods. You repeat this till you can adjust the tension to the first line.

It a simple process, get the extender a little longer than the length of your stretched flaccid penis then the springs have something to push back against. The longer the extender is versus your stretched penis the more pressure is applied to your penis.

This will give you a ball park idea of how much extension needs to be added to your extender:
extender = 3.75 inch
extender + .5 = 4.25 inch
extender + 1 = 4.75 inch
extender + 1 + .5 = 5.25 inch
extender + 2 = 5.75 inch
extender + 2 + .5 = 6.25 inch
extender + 3 = 6.75 inch
extender + 3 + .5 = 7.25 inch
extender + 3 + 1 = 7.75 inch
extender + 3 + 1 + .5 = 8.25 inch
extender + 3 + 2 = 8.75 inch
extender + 3 + 2 + .5 = 9.25 inch
extender + 3 + 2 + 1 = 9.75 inch
extender + 3 + 2 + 1 + .5 = 10.25 inch

pfm

[pfm]

You'll probably need 2.5" or 3.0" of extension to get the tension set to 600 (first line is 600, second is 1200, third is 1800).
pfm

[pivo]

Hi pfm,

You said, "To increase tension turn the adjustment knobs to the left; this makes the length of the extender longer". While I can do this with no problem when my penis is strapped my question is that even if I extend them to the max(to test it out not that I use it like that) when I compress the device I can always see the three lines even though the device is extended which annoys me because I am doing something wrong. I know you told me to add an extra rod but my penis will slip if I do. I just don't get why I always see the three lines, I extend the adjustment knobs, compress the device to the bottom, and when I release the three lines are still there... Thank you for your help.

[Dangler]

at youtube.com, if you search using "x4 penis extender", there are videos that might help you see or understand the use of the device a little better.
for example:
http://www.youtube.com/watch?v=ZR8Biu7csj0

A blue dildo is used, it is definitely too long for the length that the author has constructed his X4.
Dangler

[pfm]

mbobb2012,
Do you have email or some instant messenger? I did post some links to a site with some actual person putting on and adjusting an extender, but they were removed because they were on a competitors web site. I wasn't promoting the other product, it's just the videos were helpful to those people who need visual aids.
pfm

[mbobb2012]

yeah my messenger and my email are the same as my username @yahoo.com